Newm79950-0008

Ranger 39mm steel case Beige domed dial

$3,825

EXPEDITION INTO THE DUNES

With a 39mm fully brushed stainless steel case, Manufacture Calibre MT5402, and a matt "Dune white" dial, the Ranger model perpetuates the spirit of the expedition watch. The dial is a subtle homage to TUDOR’s involvement in the world’s toughest race. With a permanent population of zero, the only things you’ll find along the tracks of Dakar are extreme heat, rocks and towering sand dunes. It’s also exactly the kind of place the Ranger was made for.

The Spirit of an expedition watch

Watch Specifications

Reference: M79950-0008

Five-year Guarantee
- Case
  39mm steel case, satin finish
  Lugs: 20mm lug width
  Case thickness: 12.0mm
- Waterproofness
  Waterproof to 100m (330 ft)
- Bezel
  Smooth satin-brushed steel
- Dial
  Beige, domed
- Crystal
  Domed sapphire crystal
- Movement
  Manufacture Calibre MT5402 (COSC)
  Self-winding mechanical movement with bidirectional rotor system
- Power Reserve
  Power reserve of approximately 70 hours
- Winding Crown
  Screw-down winding crown in steel with the TUDOR rose in relief
- Bracelet
  Steel bracelet with three links and a folding clasp with the TUDOR “T-fit” safety catch

Five-year Guarantee
Five-year transferable guarantee with no registration or periodic maintenance checks required
Case
39mm steel case, satin finish
Lugs: 20mm lug width
Case thickness: 12.0mm
Movement
Manufacture Calibre MT5402 (COSC)
Self-winding mechanical movement with bidirectional rotor system
Power Reserve
Power reserve of approximately 70 hours
Winding Crown
Screw-down winding crown in steel with the TUDOR rose in relief
Waterproofness
Waterproof to 100m (330 ft)
Bezel
Smooth satin-brushed steel
Dial
Beige, domed
Crystal
Domed sapphire crystal
Bracelet
Steel bracelet with three links and a folding clasp with the TUDOR “T-fit” safety catch

The spirit of
Ranger
Discover the spirit of the TUDOR Ranger and the other models within the range.
Discover more
How to set your watch
Select your desired section
A
Winding crown
The winding crown is used to set the time and to wind the watch if it has not been worn. The winding crown is screwed down onto the case to ensure water resistance. It must be fully tightened after each manipulation.
Seconds hand
The hand indicating seconds.
Hour and minute hands
The hand on the watch indicating the time.
Step 1/3
Build your
Ranger
Follow a few simple steps to build your Ranger.
Get started