m79683-0002

Black Bay One 41 S&G Manufacture Calibre MT5601 (COSC) 41mm steel case Steel and yellow gold bracelet

$6,500

Watch Specifications

Reference: M79683-0002

Five-year Guarantee
- Case
  41mm steel case with polished and satin finish
  Lugs: 22mm lug width
  Case thickness: 12.2mm
- Waterproofness
  Waterproof to 100m (330 ft)
- Bezel
  Fixed bezel in steel covered by a 0.3mm yellow gold cap
- Dial
  Silver
- Crystal
  Flat sapphire crystal
- Movement
  Manufacture Calibre MT5601 (COSC)
  Self-winding mechanical movement with bidirectional rotor system
- Power Reserve
  Power reserve of approximately 70 hours
- Winding Crown
  Screw-down winding crown with the TUDOR rose in relief. Steel covered by a 0.1mm yellow gold cap
- Bracelet
  First center links in steel or solid yellow gold. Remaining centre links are made of a steel core capped with 0.2mm of yellow gold. TUDOR "T-fit" folding clasp with safety catch. The logo on the catch is made of solid yellow gold

Five-year Guarantee
Five-year transferable guarantee with no registration or periodic maintenance checks required
Case
41mm steel case with polished and satin finish
Lugs: 22mm lug width
Case thickness: 12.2mm
Movement
Manufacture Calibre MT5601 (COSC)
Self-winding mechanical movement with bidirectional rotor system
Power Reserve
Power reserve of approximately 70 hours
Winding Crown
Screw-down winding crown with the TUDOR rose in relief. Steel covered by a 0.1mm yellow gold cap
Waterproofness
Waterproof to 100m (330 ft)
Bezel
Fixed bezel in steel covered by a 0.3mm yellow gold cap
Dial
Silver
Crystal
Flat sapphire crystal
Bracelet
First center links in steel or solid yellow gold. Remaining centre links are made of a steel core capped with 0.2mm of yellow gold. TUDOR "T-fit" folding clasp with safety catch. The logo on the catch is made of solid yellow gold

The spirit of
Black Bay One
Discover the spirit of the TUDOR Black Bay One and the other models within the range.
Discover more
How to set your watch
Select your desired section
A
Winding crown
The winding crown is used to set the time and date and to wind the watch if it has not been worn. The winding crown is screwed down onto the case to ensure water resistance. It must be fully tightened after each manipulation.
Seconds hand
The hand indicating seconds.
Hour and minute hands
The hands on the watch indicating the time.
Step 1/3
Build your
Black Bay One
Follow a few simple steps to build your Black Bay One.
Get started